Engineering Knowledge Cards.
Confidence HighUpdated 2026-09-25

How tile/stone setting-out schemes (tile/slab layout drawings) affect wastage rates and material costs: layout rules, the quota's comprehensive determination basis and adjustable exceptions, and cutting labor coefficients

The setting-out scheme determines the actual wastage rate — the quota wastage rate (tiles/mosaics 2%) is determined on the basis of "reasonable layout", and layout quality can make the actual wastage float between 2% and 10%. Layout rules: floors start from the door line, walls from external corners, non-whole tiles concentrated at internal corners; no more than 2 columns of non-full tiles per wall, each ≥1/3 of the full width (DB/T 29-35-2017 Clause 7.1.4). The quota wastage is a comprehensively determined value not adjusted for layout (Beijing DB11/T 2382-2024 tile and stone finishes consumption 1.02 m²/m²); over-consumption costs are borne by the contractor (GB/T 50500-2024 Clause 3.6.3); where joint alignment, patterns, or artistic shapes cause wastage differing from the quota, the consumption may be adjusted (T SZCA 5-2022 Clause 0.1.15). Each ±1% change in wastage rate changes material cost by ≈ paved area × unit price × 1%.

Applicable Codes

  • DB11/T 2382-2024 · Standard for Construction Consumption of Construction Works (Beijing) App. A A.11.2 块料面层(A-11-51、A-11-53)
  • T SZCA 5-2022《洁净工程项目定额》总则第 0.1.15 条
  • GB/T 50905-2014 · Code for Green Construction of Building Engineering 第 8.1.1 条
  • DB/T 29-35-2017 · Technical Standard for Residential Decoration Engineering of Tianjin 第 7.1.4 条
  • T/CBDA 61-2022 · Standard for Green Construction Management of Building Decoration Works 第 6.2.3 条
  • T CREA 033-2024《碳中和室内空间评价标准》第 6.2.11 条
  • GB/T 50500-2024 · Standard for bills of quantities and valuation for construction works 第 3.6.3 条
  • DB11 512-2017 · Technical Specification for Application of Stone in Building Decoration Works (Beijing)
  • TB/T 10821-2024 · Basic Quota of Railway Engineering 附录材料工地搬运及操作损耗率
  • TB/T 10831-2024 · Budget Quota of Railway Engineering (Volume 10: Housing Works)
  • 湖南 2025 版《房屋建筑与装饰工程消耗量标准》块料面层章节说明
  • DB62/T 3027-2018 · Specification for Construction Technology of Building Floor Works (Gansu)

Topic Positioning

The transmission logic by which the setting-out (tile/slab layout) scheme for tile and stone finishes — ceramic tiles, stone, etc. — in decoration works determines the actual material wastage rate and thereby material costs, together with the compliant layout rules, the quota's comprehensive determination basis for wastage and adjustable exceptions, and the pricing rules for layout-induced cutting labor. Applicable to layout development, wastage estimation, and price verification of tile and stone finishes.

Core Conclusions

(1) The quota wastage rate is determined on "reasonable layout": e.g., the railway basic (fundamental) quota manual TB/T 10821-2024, appendix, gives 2% for tiles/mosaics; layout quality can float the actual wastage between 2% and 10%+, directly translating into material cost changes. (2) Layout rules: floor stone setting-out starts from the door line (DB11 512-2017 Clause 5.3.5); walls start from external corners, with non-modular stone preferably laid at internal corners (Clause 5.2.3); no more than two columns of non-full tiles per wall, and the non-full width should be no less than 1/3 of the full width (DB/T 29-35-2017 Clause 7.1.4); floor and wall/column modules should be coordinated with neat joints (DB11 512-2017 Clause 5.3.1); stair landings should preferably be laid symmetrically about the stair-well centerline (Clause 5.4.3); tiling should use whole tiles (DB62/T 3027-2018 Clause 6.4.13). (3) Wastage cost transmission: each ±1% change in wastage rate changes material cost by ≈ paved area × material unit price × 1%; poor layout (2%→8%) raises material cost by about 6%, the sensitivity being amplified for high unit-price materials (stone, sintered slabs). (4) Quota wastage is a comprehensively determined value and is not adjusted for different layouts: items A-11-51 (block area within 0.36 m²) and A-11-53 (block area within 1 m²) of the Beijing DB11/T 2382-2024 Construction Consumption Standard both adopt a material consumption of 1.02 m²/m² (net 1.0 + wastage 2%), and conventional layouts such as straight and running-bond are all included in the comprehensive value. BOQ quantities are measured net and wastage is contained in the quota consumption (GB/T 50854-2024 basis); the cost of over-consumption caused by the contractor (the portion beyond the drawing quantity plus the agreed valid wastage rate) is borne by the contractor (GB/T 50500-2024 Clause 3.6.3) — the portion of actual wastage exceeding the 2% quota due to poor layout is absorbed by the constructor. (5) Adjustable exceptions: where the material wastage rate differs from the quota because of design requirements for joint alignment, patterns, or artistic shapes, the material consumption of the corresponding quota line items may be adjusted in accordance with the design requirements, the layout drawing and the material wastage confirmed on site (T SZCA 5-2022 Clause 0.1.15, a group standard) — this must be estimated in advance against the layout drawing at the tender (priced offer) stage and written into the contract/tender documents; one cannot count on it being granted automatically at settlement. (6) Pricing of layout-induced processing and labor: the work content of tile and stone finish items does not include edge grinding and chamfering at external corners; where incurred, the corresponding items under other works apply; for tiling of tile and stone finishes on irregular wall faces such as arcs and zigzags, the labor of the corresponding items is multiplied by 1.25; stone tiling items are compiled for a single block area within 0.64 m² — if the single block area exceeds 0.64 m², the labor is multiplied by 1.15; on-site 45° edge cutting of exterior wall face bricks applies the corresponding stone-cutting items multiplied by 0.50; paper-faced tiles take a labor multiplier of 1.15; joint widths for face brick tiling are considered within 5 mm and 10 mm — where the design joint width differs, the quantities of tile and jointing materials may be adjusted (Hunan 2025 edition Consumption Standard for Building and Decoration Works, notes on tile and stone finishes). (7) Layout optimization is a mandatory code requirement: GB/T 50905-2014 Code for Green Construction of Building Works, Clause 8.1.1 — before construction, blocks, panels and rolls shall undergo layout optimization design to reduce cutting and the resulting noise and waste; T/CBDA 61-2022 Standard for Green Construction Management of Building Decoration Works, Clause 6.2.3 — before construction, layout drawings for blocks, panels and rolls shall be designed according to site conditions; T CREA 033-2024 Evaluation Standard for Carbon-Neutral Interior Spaces, Clause 6.2.11 — "reasonably controlling the wastage of indoor decoration materials during decoration construction" carries a total score of 6 points, rated by the reduction in the wastage rates of main decoration materials against the quota wastage rates of the Consumption Quota for Building and Decoration Works TY 01-31; veneer materials shall undergo overall layout planning before construction to reduce the number of non-whole panels.

Applicable Boundaries

Applies to layout development and wastage estimation for tile and stone finishes such as ceramic tiles and stone; not applicable to dry-hung curtain walls (measured by frame peripheral/developed (unfolded) area) or to processes without layout wastage such as paint. Wastage-rate baselines vary with local quotas: railway projects follow TB/T 10821-2024, building works follow the current local quota items (e.g., Beijing DB11/T 2382-2024); T SZCA 5-2022 is a group standard that serves as a basis for adjustment only within its scope of application — where local quota provisions do not expressly permit adjustment, no adjustment may be made; the wastage-rate reduction scoring of T CREA 033-2024 applies only to carbon-neutral interior space pre-evaluation/evaluation scenarios. In projects with free-issue materials (by the employer), layout over-consumption converts directly into the risk of over-quota deduction.

Further Reading

Layout rules: DB11 512-2017 Technical Specification for Application of Stone in Building Decoration Works, Clauses 4.3.2, 5.2.3, 5.3.1, 5.3.5, 5.4.3; DB/T 29-35-2017 Tianjin Technical Standard for Residential Decoration Works, Clause 7.1.4; DB62/T 3027-2018 Work Procedure for Building Floor Works, Clause 6.4.13. Quota determination: Beijing DB11/T 2382-2024 Appendix A, Building and Decoration Works, A.11.2 tile and stone finishes (A-11-51, A-11-53); TB/T 10821-2024 Railway Basic (Fundamental) Quota Manual, appendix "On-site handling and operation wastage rates of materials"; TB/T 10831-2024 Volume 10 volume explanation (patterns measured by the maximum peripheral rectangle). Wastage adjustment and responsibility: T SZCA 5-2022 Quota for Cleanroom Projects, general provisions, Clause 0.1.15; GB/T 50500-2024 China national pricing standard for BOQ, Clause 3.6.3. Mandatory layout for green construction: GB/T 50905-2014 Code for Green Construction of Building Works, Clause 8.1.1; T/CBDA 61-2022 Standard for Green Construction Management of Building Decoration Works, Clause 6.2.3; T CREA 033-2024 Evaluation Standard for Carbon-Neutral Interior Spaces, Clause 6.2.11 and Table 6.2.11.

Keywords