GB 55032-2022 "General Code for Construction Quality Control of Building and Municipal Engineering": effect rules and five-chapter framework overview
GB 55032-2022 is a fully mandatory engineering-construction code (implemented 1 March 2023); where current standards are inconsistent with it, this code prevails, and local authorities may only supplement and raise — not lower — its requirements. Five chapters: general provisions; basic requirements; construction-process quality control; construction quality acceptance; quality warranty and maintenance. Passing acceptance takes "national mandatory code + survey and design documents + contract" as basic conditions; the code states the minimum floor, which design/contract may raise; the formerly scattered mandatory provisions of GB 50210-2018, GB 50300-2013, GB 50618-2011, and JGJ 190-2010 have been repealed and merged into this code.
Applicable Codes
- GB 55032-2022 建筑与市政工程施工质量控制通用规范
- GB 50210-2018 建筑装饰装修工程质量验收标准
- GB 50300-2013 建筑工程施工质量验收统一标准
- GB 50618-2011 房屋建筑和市政基础设施工程质量检测技术管理规范
- JGJ 190-2010 建筑工程检测试验技术管理规范
Topic Positioning
This card summarizes the effect rules, five-chapter framework, and acceptance floor of GB 55032-2022 "General Code for Construction Quality Control of Building and Municipal Engineering", for quickly locating what this fully mandatory code governs and how.
Core Conclusions
- Nature and effect: issued by MOHURD Announcement No. 117 of 2022, effective 1 March 2023; fully mandatory, with every provision strictly enforced; where current engineering-construction standards are inconsistent with it, this code prevails; State Council departments and provincial authorities may supplement, refine, and raise requirements, but not lower them.
- Five-chapter framework: 1 General provisions (scope and compliance determination); 2 Basic requirements (quality management systems, quality-responsibility traceability, standardized quality management, quality-control procedures for survey and design documents); 3 Construction-process quality control (requirements on each stage by the man/machine/material/method/environment factors, including quality planning, incoming inspection and re-testing, procedure connections and concealed-work acceptance); 4 Construction quality acceptance (acceptance management, division basis, pass criteria, acceptance organization); 5 Quality warranty and maintenance (warranty responsibility, systems, and plans).
- Acceptance floor (4.2.1): basic conditions for passing = compliance with current national mandatory codes + survey and design documents + contract stipulations; the code states the minimum requirement for construction quality — design documents or the construction contract may set higher standards, but not lower than the code.
- Warranty (5.0.2): the construction owner establishes quality follow-up and complaint mechanisms; the contractor signs a construction quality warranty certificate specifying warranty scope, duration, and responsibility.
Applicable Boundaries
Applies to construction quality control of building and municipal works and must be enforced; it does not apply under force majeure such as war or natural disasters. This card is a framework overview — for specifics (inspection-lot pass criteria, material re-testing, image retention for concealed work, etc.) return to the corresponding chapters of the original text and verify clause numbers.
Further Reading
For implementation and repeal lists see MOHURD Announcement No. 117 of 2022; repealed scattered mandatory provisions: GB 50210-2018 Clauses 3.1.4, 6.1.11, 6.1.12, 7.1.12, 11.1.12; GB 50300-2013 Clauses 5.0.8, 6.0.6; GB 50618-2011 Clauses 3.0.3, 3.0.4, 3.0.10, 3.0.13, 4.1.1, 4.2.1, 4.4.10, 5.4.1; JGJ 190-2010 Clauses 3.0.4, 3.0.6, 3.0.8, 5.4.1, 5.4.2, 5.7.4. Use together with GB 50300-2013 (acceptance division) and GB/T 50430-2017 (quality management).
Keywords
- GB 55032-2022
- 建筑与市政工程施工质量控制通用规范
- 强制性工程建设规范
- 施工质量控制
- 施工质量验收
- 质量保修
- 强制性条文废止