Current building-area calculation rules: GB 55031-2022 Section 3.1 (mandatory) vs GB/T 50353-2013, and debunking "50353-2023"
GB/T 50353-2023 does not exist; the current recommended code remains GB/T 50353-2013; what changed area rules from 2023-03-01 is the fully mandatory code GB 55031-2022 "General code for civil buildings", Section 3.1, which prevails on conflict. Key changes: the calculation datum became the outer face of the exterior envelope (including insulation and finish layers); the four-category space principle; balconies uniformly at 1/2 of the envelope of the guarding facilities (enclosed ones counting full area); new above/below-ground division and definitions of usable area of functional spaces; non-countable items consolidated into 6 classes.
Applicable Codes
- GB 55031-2022 民用建筑通用规范 第3.1节 建筑面积与高度
- GB/T 50353-2013 建筑工程建筑面积计算规范
Topic Positioning
Sorting out the current gross floor area calculation system: clarifying that "GB/T 50353-2023" does not exist, that the current recommended standard is GB/T 50353-2013, and that the mandatory area rules effective from 2023 come from Section 3.1 "Gross Floor Area and Height" of GB 55031-2022 "General Code for Civil Buildings"; this card summarizes the main differences between the two sets of rules.
Core Conclusions
- Version facts: GB/T 50353-2023 was never issued; most online interpretations are self-media misinformation (attributing a draft for comments or GB 55031 implementation news to 50353); the documents currently in force are GB/T 50353-2013 and GB 55031-2022 (fully mandatory), with the mandatory code prevailing in case of conflict.
- Key changes: (1) the calculation datum changed from "outer face of the exterior structural wall" to "outer face of the exterior envelope" (the design-finished face, including insulation and finishes; curtain walls by the outer edge of the panels); (2) a four-category space principle: enclosed with envelope -> full area; column-enclosed -> full area by the columns or the envelope's outer face; single-row or freestanding columns -> 1/2 of the horizontal projection of the roof; no columns but with guarding facilities -> 1/2 by the outer face of the guarding facilities; (3) balconies uniformly at 1/2 of the horizontal projection of the guarding facilities' outer face, enclosed balconies at full area by the envelope's outer face, no longer distinguishing inside/outside the main structure; (4) new above/below-ground division: by the outdoor design ground level; where the level crosses a space, by whether the floor is below it by more than half the storey height; (5) items excluded from area calculation consolidated into 6 classes (storey height < 2.20 m; no roof; attached appendages; space under cantilevers; urban passage space; independent structures); (6) new definitions of usable area of functional spaces (inner face of walls, excluding finishes) and of functional-unit gross floor area.
Applicable Boundaries
Applies to area calculation, indicator checking, and drawing review of civil and general building works. The 2.20 m storey-height threshold agrees across both: GB/T 50353-2013 counts >= 2.20 m in full and below that at 1/2; GB 55031-2022 Clause 3.1.4 makes 2.20 m and above the precondition for counting and Clause 3.1.6 excludes below 2.20 m — the detailed rules differ, so care is required. Where local implementation rules coexist with the two codes, the local provisions apply; verify against the latest valid version before construction.
Further Reading
GB 55031-2022 "General Code for Civil Buildings", Clauses 3.1.1-3.1.7 (calculation datum, above/below-ground division, storeys, four space categories, balconies, excluded items, usable area); GB/T 50353-2013 "Code for Calculation of Gross Floor Area of Construction Works", Clauses 3.0.1, 3.0.27; MOHURD website announcements verify the 50353 version history.
Keywords
- gross floor area (GFA)
- GB 55031
- General Code for Civil Buildings (GB 55031)
- GB/T 50353
- 建筑工程建筑面积计算规范
- 阳台建筑面积
- 外围护结构外表面
- 地上地下建筑面积