Engineering Knowledge Cards.
Confidence HighUpdated 2026-10-29

Time limits for the buyer's quality or quantity objection notice and the 'deemed conformity' rule (Civil Code Article 621): agreed inspection periods; absent agreement, a reasonable period plus a 2-year outer limit from receipt; priority of the quality guarantee period; no notice limit where the seller acted in bad faith - applied where the purchaser rejects goods on grounds of non-conforming quality

Civil Code Article 621: where an inspection period is agreed, the buyer must notify the seller within that period of any non-conformity in quantity or quality, and failure to notify in due time is deemed conformity in quantity or quality; where no inspection period is agreed, notice must be given within a reasonable period after the buyer discovers or should have discovered the non-conformity, and failure to notify within 2 years of receipt of the subject matter is likewise deemed conformity, except that where the subject matter has a quality guarantee period that period applies instead of the 2-year rule; where the seller knew or should have known that the subject matter was non-conforming, the buyer is not bound by the notice periods. So where a purchaser rejects custom-made components on grounds of non-conforming quality, whether the objection was raised within the statutory period directly determines whether the rejection stands; where no objection is raised in time, the quality is deemed conforming, the rejection becomes rejection without cause, and damages are payable for breach.

Applicable Codes

  • 《中华人民共和国民法典》第五百九十五条
  • 《中华人民共和国民法典》第六百二十一条

Scope of this card

The statutory objection notice periods and the consequences of their lapse where a buyer under a sales contract rejects the goods, refuses payment or counterclaims on grounds of 'non-conforming quality or quantity' - the rule that the subject matter is 'deemed to conform in quantity or quality', the 2-year outer limit, the priority of the quality guarantee period, and the exception where the seller knew of the defect. For use when reviewing defences in sales-type disputes such as a purchaser's rejection of custom-made components or finished goods.

Core conclusions

I. The contractual premise Civil Code Article 595: 'A sales contract is a contract under which the seller transfers ownership of the subject matter to the buyer and the buyer pays the price.' The rules in this card apply only where the transaction is qualified as a sale; quality objections under contracts for work or under construction contracts are assessed under their acceptance terms and the corresponding rules.

II. Objection periods and consequences of lapse (text of Article 621) 'Where the parties have agreed an inspection period, the buyer shall notify the seller within that period of any non-conformity of the subject matter in quantity or quality. If the buyer neglects to do so, the subject matter is deemed to conform in quantity or quality. Where no inspection period is agreed, the buyer shall notify the seller within a reasonable period after discovering, or when it should have discovered, non-conformity of the subject matter in quantity or quality. If the buyer fails to notify within a reasonable period, or within 2 years of receipt of the subject matter, the subject matter is deemed to conform in quantity or quality; however, where the subject matter has a quality guarantee period, that period applies and the 2-year rule does not. Where the seller knew or should have known that the subject matter supplied was non-conforming, the buyer is not bound by the notice periods of the preceding two paragraphs.'

III. Layered rules

  1. Agreed inspection period: notify within the agreed period; failure to notify in time means the quantity or quality is deemed conforming, and the buyer loses the substantive basis to reject the goods, withhold payment or counterclaim on that ground.
  2. No agreed inspection period: a double limit - 'a reasonable period from discovery or constructive discovery' plus '2 years from receipt of the subject matter' as the outer limit.
  3. A quality guarantee period exists: the guarantee period applies; the 2-year outer limit does not.
  4. Bad-faith seller (knew or should have known of the non-conformity): the buyer is not bound by the above notice periods and may pursue defect liability at any time.

IV. Effect on a rejection defence Where a purchaser rejects components and refuses damages on grounds of non-conforming quality, whether 'non-conforming quality' stands depends on whether it raised an objection within the statutory period and produced evidence; where no objection is raised in time, the quality is deemed conforming, its rejection becomes rejection without cause, and it is liable in damages for breach. Conversely, where the objection is timely and well founded and the defect is attributable to the supplier, the damages claim is correspondingly reduced or defeated.

Boundaries of application

  • These rules reach only sales contracts; where custom-made components are qualified as a contract for work, quality disputes are handled under the rules on acceptance of the work product and the ordering party's instructions, and Article 621 does not apply directly.
  • Where the agreed inspection period is very short and the defect is latent, when the buyer 'should have discovered' it must be judged by the nature of the defect and the difficulty of inspection; formal acceptance cannot by itself give rise to a presumption that the buyer knew of all latent defects.
  • 'Deemed conformity' is a legal fiction whose effect is to bar the buyer from defending or claiming on grounds of quantity or quality non-conformity; it does not affect the seller's own defect liability in the case of the bad-faith seller.
  • The 2-year period is an outer limit, not a minimum protection period: absent agreement, the buyer must still notify within a reasonable period of discovery; the two run in parallel and whichever expires first takes effect.
  • Evidence of the delivery time and of service of the inspection notice (receipt notes, acceptance records, written objection letters, correspondence) is the key to proving the application of this article.

Further reading

Civil Code, Book Three, Chapter IX 'Sales Contracts', Article 595 (definition of a sales contract), Article 621 (inspection period and duty to notify, deemed conformity, the 2-year period and the quality guarantee period, the bad-faith seller exception); supporting inspection and objection rules in the corresponding articles of that chapter, in contract quality clauses and in acceptance standard annexes. Related cards: composition and calculation of the costs of suspension caused by a supplier's late delivery; the rule that putting the works into use before acceptance is deemed acceptance of their quality.

Keywords

  • 质量异议期限
  • 检验期限
  • 视为质量符合约定
  • 民法典621条
  • 收货后二年
  • 质量保证期
  • 拒收抗辩
  • 买卖合同

Cited By