Engineering Knowledge Cards.
Confidence HighUpdated 2026-09-25

Avoiding mispricing when material names are similar but specifications differ: three lines of specification-checking defense across preparation, pricing, and audit

The three forms of mispricing (specifications missing from item characteristics, near-name mismatches, missing specification/unit dimensions) can be intercepted by three lines of defense: at preparation, write full specifications and models into the item characteristics (GB/T 50500-2024 Clause 4.2.2); at pricing, check the quota item's bracketed specification against the drawings + match material price on three fields simultaneously — name/specification/unit (do not pick the published price directly; mark conversions with "换"); at audit, use same-name specification gradients (C30>C25, DN32>DN25) to back-detect mismatches.

Applicable Codes

  • GB/T 50500-2024 建设工程工程量清单计价标准
  • GB/T 51095-2015 建设工程造价咨询规范
  • DB42/T 823-2021 建设工程造价咨询质量控制规范
  • DBJ/T 15-153-2019 广东省建设项目全过程造价管理规范
  • T/ZBD 100.5-2023 建设工程结算审核作业指引
  • DBJ51/T 048-2015 四川省建设工程造价电子数据标准

Topic Positioning

This card covers how to avoid mispricing when material names are similar but specifications differ, giving specification-checking methods across the three lines of defense — list preparation, quota pricing, and cost audit — for direct use by cost preparation and audit personnel.

Core Conclusions

Three forms of mispricing: ① specifications omitted from characteristics (the list says only "cast-in-place concrete" without C25/C30); ② near-name mismatches (HRB400 priced as HRB500, P.O 42.5 and 42.5R mixed, medium/fine sand undifferentiated); ③ missing specification/unit dimensions (pipe diameter and wall thickness, sheet thickness undifferentiated). Corresponding three lines of defense: 1 Preparation: item characteristics follow the design documents (GB/T 50500-2024 Clause 4.2.2), at minimum stating variety, specification/model, performance grade, location, and construction requirements; an omitted specification is a BOQ deficiency — under unit-rate contracts the employer bears responsibility and the unit price is redetermined at settlement per actual characteristics. 2 Pricing: double specification check — quota items are checked one-by-one against the drawings by their bracketed specification (e.g., "cast-in-place concrete C30"); where the name matches but the specification does not, first check the quota notes whether conversion is allowed — do not simply take the near item; material unit prices must match on three fields simultaneously — name, specification, unit; published prices come in composite and by-specification forms and must not be picked directly (DBJ/T 15-153-2019 Clause 7.6.4); bracketed main materials are priced per design specification, and non-bracketed auxiliary materials must not be re-specified; specification conversions follow the quota notes and carry the "换" mark (DBJ51/T 048-2015 Clause 6.5.6). 3 Audit: unit prices of the same material name across specifications should show a reasonable gradient (C30>C25, HRB500>HRB400, DN32>DN25) — an anomalous gradient signals a mismatch; verify that pricing follows the contract and that same-material prices in new pricings are reasonable (T/ZBD 100.5-2023 Clauses 3.2.4, 5.0.11); for high-price items, expand the labor-material-machinery table and spot-check the three elements name + specification + unit price.

Applicable Boundaries

Applies to preparation and audit of working-drawing budgets / settlements under the BOQ pricing mode; the all-in unit rate is on a pre-tax, fully inclusive basis (composition: labor, materials, machinery, management fee, profit, statutory fees and taxes — GB/T 51095-2015 Clause 5.3.8); quota conversion and fee accrual rules follow the local quota and companion fee standards; not applicable to rough estimates without quota-based pricing.

Further Reading

GB/T 50500-2024 Clauses 3.2.2, 4.2.2; GB/T 51095-2015 Clauses 5.3.8–5.3.12; DB42/T 823-2021 Clause 6.3.9; DBJ/T 15-153-2019 Clause 7.6.4; T/ZBD 100.5-2023 Clauses 3.2.4, 5.0.11; DBJ51/T 048-2015 Clause 6.5.6.

Keywords

Cited By